Volumes
- Harmonic Volumesv1×36 (gain01–gain36)range: per-harmonic dB (varies)default: 1 / harmonic number
volumes of the first 36 harmonics. All at full makes a sawtooth.
- Volumev17range: -64.0dB to 20.0dBdefault: 0.0dB
the overall volume (saves with the preset)
- Filter Cutoffv18range: 20 Hz to 20.0 kHzdefault: 5.0 kHz
- Filter Slopev19range: 0 to 64default: 3
- Filter Typev25choices:LowpassBandpass
Envelope
- One Shotv20range: off / ondefault: off
when enabled, notes always play through the full envelope
- Relative Modev10range: off / ondefault: off
when enabled, sliders add/subtract from the existing shape, allowing for more unique shapes
- Attack Overshootv16range: 0.00 to 0.50default: 0.30
- Decay and Release Undershootv16range: 0.0000100 to 0.1000000default: 0.0001000
- Offset Amountv1range: 0ms to 30.00sdefault: 0ms
amount of time before harmonics turn on
- Offset Shapev8choices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Offset Curvev7range: -8.00 to 8.00default: -0.00
what curve applies to the harmonics
- Offset Affectsv8choices:AllOddEvenOctave
what harmonics should these settings apply to?
- Attack Amountv1range: 0ms to 30.00sdefault: 0ms
amount of time harmonics take to reach their full volume
- Attack Shapev8choices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Attack Curvev7range: -8.00 to 8.00default: -4.00
what curve applies to the harmonics
- Attack Affectsv8choices:AllOddEvenOctave
what harmonics should these settings apply to?
- Decay Amountv1range: 0ms to 30.00sdefault: 0ms
after reaching full volume, the amount of time harmonics take to fall to the sustain level
- Decay Shapev8choices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Decay Curvev7range: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Decay Affectsv8choices:AllOddEvenOctave
what harmonics should these settings apply to?
- Sustain Amountv1range: OFF to 0.0dBdefault: 0.0dB
volume level that harmonics play at when you hold a note
- Sustain Shapev8choices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Sustain Curvev7range: -8.00 to 8.00default: -0.00
what curve applies to the harmonics
- Sustain Affectsv8choices:AllOddEvenOctave
what harmonics should these settings apply to?
- Hold Amountv1range: 0ms to 30.00sdefault: 0ms
amount of time harmonics will hold the sustain volume after you release a note
- Hold Shapev8choices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Hold Curvev7range: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Hold Affectsv8choices:AllOddEvenOctave
what harmonics should these settings apply to?
- Release Amountv1range: 0ms to 40.00sdefault: 500ms
amount of time it takes harmonics to fade out after you release a note
- Release Shapev8choices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Release Curvev7range: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Release Affectsv8choices:AllOddEvenOctave
what harmonics should these settings apply to?
Trem
- Trem Enablev13range: off / ondefault: off
bypass the whole Trem section
- Env->Tremv24range: -100% to 100%default: 0%
positive: more trem when harmonic is loud. negative: no trem when harmonic is loud.
- Trem Amountv13range: 0% to 100%default: 100%
how deep the volume lfos on the harmonics go
- Trem Amount Affectsv23choices:AllOddEvenOctave
which harmonics does the trem depth apply to?
- Trem Amount X (Distribution)v13range: 0.00 to 1.00default: 0.50
how the trem depth amount should apply across the harmonics
- Trem Amount Y (Curve)v13range: 0.00 to 1.00default: 0.50
how the trem depth amount should apply across the harmonics
- Trem Sync Typev11choices:FreeBPMBPM Abs
choose what the volume modulation is synced to
- Trem Typev11choices:TriangleRampSquare
how the harmonic volumes behave over time (aka LFO shape)
- Trem Type Invertv16range: off / ondefault: off
Flip the shape (ramp up becomes ramp down, etc)
- Trem Rate Hzv13range: 0.10 Hz to 200 Hzdefault: 2.00 Hz
free running volume modulation specified in Hz
- Trem Rate Notev11choices:4/13/12/11/11/2 D1 T1/21/4 D1/2 T1/41/8 D1/4 T1/81/16 D1/8 T1/161/32 D1/16 T1/321/64
follows your DAW’s BPM and lets you specify note values (120bpm default)
- Trem Rate X (Distribution)v13range: 0.00 to 1.00default: 0.50
how the trem rate applies across the harmonics
- Trem Rate Y (Curve)v13range: 0.00 to 1.00default: 0.50
how the trem rate applies across the harmonics
- Trem Pattern Amountv27range: 0% to 100%default: 0%
the max pattern amount harmonics can have
- Trem Pattern Shapev27choices:AllRampTriangleSineRandom
the shape the pattern makes across the harmonics in time
- Trem Pattern Invertv27range: off / ondefault: off
invert the pattern shape direction (for Ramp, Sine, Triangle), or regenerate (for Random)
- Trem Pattern Num Harmonicsv27range: 2 to 512default: 8
how many harmonics the pattern applies to (use low numbers for rhythmic patterns)
- Trem Sharpnessv11range: 0% to 100%default: 50%
higher value has sharper more sparse sound, less time “on”
Pitch
- Pitch Enablev17range: off / ondefault: off
bypass the whole pitch section
- Pitch Invertv17range: off / ondefault: off
Flip the shapes (ramp up becomes ramp down, etc)
- Pitch Rate Hzv13range: 0.05 Hz to 500 Hzdefault: 5.0 Hz
how many times a second the pitch modulates
- Pitch Rate Notev13choices:4/13/12/11/11/2 D1 T1/21/4 D1/2 T1/41/8 D1/4 T1/81/16 D1/8 T1/161/32 D1/16 T1/321/64
how many times a second the pitch modulates
- Pitch Sync Typev13choices:FreeBPMTrem
how would you like your pitch synced?
- Pitch LFO Shapev13choices:SineTriangleRampSquare
the waveform that the pitches of harmonics follow (pitch LFO shape)
- Pitch Rate X (Distribution)v13range: 0.00 to 1.00default: 0.00
how the pitch rate applies across the harmonics
- Pitch Rate Y (Curve)v13range: 0.00 to 1.00default: 0.50
how the pitch rate applies across the harmonics
- Env->Pitchv24range: -100% to 100%default: 0%
positive: more pitch amount when harmonics are loud. negative: less pitch amount when loud.
- Pitch Amountv14range: OFF to 100.0%default: 15.0%
the maximum amount the pitch will change
- Pitch Amount Affectsv14choices:AllOddEvenOctave
which harmonics does the pitch amount apply to?
- Pitch Amount X (Distribution)v14range: 0.00 to 1.00default: 0.00
how the pitch amount applies across the harmonics
- Pitch Amount Y (Curve)v14range: 0.00 to 1.00default: 0.50
how the pitch amount applies across the harmonics
- Pitch Rangev17range: 1 to 24default: 1
the range (in semitones) that PITCH AMOUNT applies to
- Pitch Noise Amountv20range: OFF to 100.0%default: 1.0%
adds gaussian noise to the pitch
- Pitch Noise Affectsv23choices:AllOddEvenOctave
which harmonics does the pitch noise apply to?
- Pitch Noise X (Distribution)v20range: 0.00 to 1.00default: 0.00
how the noise amount applies across the harmonics
- Pitch Noise Y (Curve)v20range: 0.00 to 1.00default: 0.50
how the noise amount applies across the harmonics
- Pitch Noise Modev20choices:FuzzSwarm
the character of the pitch noise (fuzz or swarm)
- Pitch Stiffnessv13range: OFF to 1.0000default: OFF
each successive harmonic gets a bit sharper (like a stringed instrument on steroids)
- Retrigger Pitch LFOsv13range: off / ondefault: on
when ON, pitches reset every note; when OFF, pitches remembered for same voice
Voices
- Velocity Sensitivityv21range: OFF to 100.0%default: OFF
how much velocity will affect volume of the patch
- Reverb Mixv23range: OFF to 100.0%default: OFF
adds a reverb-like effect, with sine waves instead of reflections
- Reverb Timev23range: 100ms to 15.00sdefault: 0.50s
how long the reverb effect lasts (in seconds)
- Reverb Affectsv24choices:AllOddEvenOctave
which harmonics feed into the reverb?
- Reverb X (Distribution)v24range: 0.00 to 1.00default: 0.50
control which harmonics across the spectrum feed into the reverb
- Reverb Y (Curve)v24range: 0.00 to 1.00default: 0.50
control which harmonics across the spectrum feed into the reverb
- Harmonic Slew Msv27range: AUTO to 50.0msdefault: AUTO
smooth fast harmonic changes to reduce clicks. AUTO is a tuned default
- Max Harmonicsv27range: 1 to 511default: 511
the max number of harmonics used per voice
- Voice Modev28choices:PolyMonoLegato
how notes play: chords (poly), one at a time (mono), or gliding (legato)
- Pitch Bend Rangev20range: 1 to 24default: 2
how many semitones a controller’s pitch bend wheel will bend the pitch (in each direction)
- Glide Timev20range: 0ms to 5.00sdefault: 0ms
how long it takes to glide between notes
- Glide Time Affectsv23choices:AllOddEvenOctave
which harmonics does the glide time apply to?
- Glide Modev25choices:Last NoteRelativeAbsolute
where notes glide from. in LEGATO, only shapes the first note
- Glide Time X (Distribution)v20range: 0.00 to 1.00default: 0.50
how the glide time applies across the harmonics
- Glide Time Y (Curve)v20range: 0.00 to 1.00default: 0.50
how the glide time applies across the harmonics
- Glide Semitonesv25range: -24 semi to 24 semidefault: 1 semi
in RELATIVE glide mode, how many semitones notes glide from
- Glide Frequencyv25range: 40 Hz to 20.0 kHzdefault: 2.0 kHz
in ABSOLUTE glide mode, the fixed frequency notes glide from
- Max Voicesv19range: 1 to 20default: 20
- Envelope Splitv19range: 1 to 128default: 10
- Envelope Timingv19range: 1 to 511default: 128
- Unison Voicesv19range: 1 to 5default: 1
how many voices play with every note-on
- Unison Spreadv19range: OFF to 100.0%default: 30.0%
how much the unison voices differ in pitch
- Unison Stereov20range: OFF to 100.0%default: 30.0%
how much the unison voices spread across the stereo field
- Randomize Phasev20range: off / ondefault: off
each time you play a note, phase is randomized. helpful when unison is on
- Keyboard->ENVv24range: -100.0% to 100.0%default: OFF
positive: higher notes have longer envelopes. negative: higher notes have shorter envelopes
- Slopv24range: OFF to 100.0%default: OFF
random per-voice variation in envelope timing.
Settings
- Fine Tuningv23range: 415 Hz to 466 Hzdefault: 440 Hz
adjust the tuning of the synth, default is 440Hz (A4)
- Transposev23range: -24 semi to 12 semidefault: 0 semi
transposes the synth up or down by a number of semitones
- Attack Affectsv8Envelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Attack Amountv1Enveloperange: 0ms to 30.00sdefault: 0ms
amount of time harmonics take to reach their full volume
- Attack Curvev7Enveloperange: -8.00 to 8.00default: -4.00
what curve applies to the harmonics
- Attack Overshootv16Enveloperange: 0.00 to 0.50default: 0.30
- Attack Shapev8Envelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Decay Affectsv8Envelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Decay Amountv1Enveloperange: 0ms to 30.00sdefault: 0ms
after reaching full volume, the amount of time harmonics take to fall to the sustain level
- Decay and Release Undershootv16Enveloperange: 0.0000100 to 0.1000000default: 0.0001000
- Decay Curvev7Enveloperange: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Decay Shapev8Envelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Env->Pitchv24Pitchrange: -100% to 100%default: 0%
positive: more pitch amount when harmonics are loud. negative: less pitch amount when loud.
- Env->Tremv24Tremrange: -100% to 100%default: 0%
positive: more trem when harmonic is loud. negative: no trem when harmonic is loud.
- Envelope Splitv19Voicesrange: 1 to 128default: 10
- Envelope Timingv19Voicesrange: 1 to 511default: 128
- Filter Cutoffv18Volumesrange: 20 Hz to 20.0 kHzdefault: 5.0 kHz
- Filter Slopev19Volumesrange: 0 to 64default: 3
- Filter Typev25Volumeschoices:LowpassBandpass
- Fine Tuningv23Settingsrange: 415 Hz to 466 Hzdefault: 440 Hz
adjust the tuning of the synth, default is 440Hz (A4)
- Glide Frequencyv25Voicesrange: 40 Hz to 20.0 kHzdefault: 2.0 kHz
in ABSOLUTE glide mode, the fixed frequency notes glide from
- Glide Modev25Voiceschoices:Last NoteRelativeAbsolute
where notes glide from. in LEGATO, only shapes the first note
- Glide Semitonesv25Voicesrange: -24 semi to 24 semidefault: 1 semi
in RELATIVE glide mode, how many semitones notes glide from
- Glide Timev20Voicesrange: 0ms to 5.00sdefault: 0ms
how long it takes to glide between notes
- Glide Time Affectsv23Voiceschoices:AllOddEvenOctave
which harmonics does the glide time apply to?
- Glide Time X (Distribution)v20Voicesrange: 0.00 to 1.00default: 0.50
how the glide time applies across the harmonics
- Glide Time Y (Curve)v20Voicesrange: 0.00 to 1.00default: 0.50
how the glide time applies across the harmonics
- Harmonic Slew Msv27Voicesrange: AUTO to 50.0msdefault: AUTO
smooth fast harmonic changes to reduce clicks. AUTO is a tuned default
- Harmonic Volumesv1×36 (gain01–gain36)Volumesrange: per-harmonic dB (varies)default: 1 / harmonic number
volumes of the first 36 harmonics. All at full makes a sawtooth.
- Hold Affectsv8Envelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Hold Amountv1Enveloperange: 0ms to 30.00sdefault: 0ms
amount of time harmonics will hold the sustain volume after you release a note
- Hold Curvev7Enveloperange: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Hold Shapev8Envelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Keyboard->ENVv24Voicesrange: -100.0% to 100.0%default: OFF
positive: higher notes have longer envelopes. negative: higher notes have shorter envelopes
- Max Harmonicsv27Voicesrange: 1 to 511default: 511
the max number of harmonics used per voice
- Max Voicesv19Voicesrange: 1 to 20default: 20
- Offset Affectsv8Envelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Offset Amountv1Enveloperange: 0ms to 30.00sdefault: 0ms
amount of time before harmonics turn on
- Offset Curvev7Enveloperange: -8.00 to 8.00default: -0.00
what curve applies to the harmonics
- Offset Shapev8Envelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- One Shotv20Enveloperange: off / ondefault: off
when enabled, notes always play through the full envelope
- Pitch Amountv14Pitchrange: OFF to 100.0%default: 15.0%
the maximum amount the pitch will change
- Pitch Amount Affectsv14Pitchchoices:AllOddEvenOctave
which harmonics does the pitch amount apply to?
- Pitch Amount X (Distribution)v14Pitchrange: 0.00 to 1.00default: 0.00
how the pitch amount applies across the harmonics
- Pitch Amount Y (Curve)v14Pitchrange: 0.00 to 1.00default: 0.50
how the pitch amount applies across the harmonics
- Pitch Bend Rangev20Voicesrange: 1 to 24default: 2
how many semitones a controller’s pitch bend wheel will bend the pitch (in each direction)
- Pitch Enablev17Pitchrange: off / ondefault: off
bypass the whole pitch section
- Pitch Invertv17Pitchrange: off / ondefault: off
Flip the shapes (ramp up becomes ramp down, etc)
- Pitch LFO Shapev13Pitchchoices:SineTriangleRampSquare
the waveform that the pitches of harmonics follow (pitch LFO shape)
- Pitch Noise Affectsv23Pitchchoices:AllOddEvenOctave
which harmonics does the pitch noise apply to?
- Pitch Noise Amountv20Pitchrange: OFF to 100.0%default: 1.0%
adds gaussian noise to the pitch
- Pitch Noise Modev20Pitchchoices:FuzzSwarm
the character of the pitch noise (fuzz or swarm)
- Pitch Noise X (Distribution)v20Pitchrange: 0.00 to 1.00default: 0.00
how the noise amount applies across the harmonics
- Pitch Noise Y (Curve)v20Pitchrange: 0.00 to 1.00default: 0.50
how the noise amount applies across the harmonics
- Pitch Rangev17Pitchrange: 1 to 24default: 1
the range (in semitones) that PITCH AMOUNT applies to
- Pitch Rate Hzv13Pitchrange: 0.05 Hz to 500 Hzdefault: 5.0 Hz
how many times a second the pitch modulates
- Pitch Rate Notev13Pitchchoices:4/13/12/11/11/2 D1 T1/21/4 D1/2 T1/41/8 D1/4 T1/81/16 D1/8 T1/161/32 D1/16 T1/321/64
how many times a second the pitch modulates
- Pitch Rate X (Distribution)v13Pitchrange: 0.00 to 1.00default: 0.00
how the pitch rate applies across the harmonics
- Pitch Rate Y (Curve)v13Pitchrange: 0.00 to 1.00default: 0.50
how the pitch rate applies across the harmonics
- Pitch Stiffnessv13Pitchrange: OFF to 1.0000default: OFF
each successive harmonic gets a bit sharper (like a stringed instrument on steroids)
- Pitch Sync Typev13Pitchchoices:FreeBPMTrem
how would you like your pitch synced?
- Randomize Phasev20Voicesrange: off / ondefault: off
each time you play a note, phase is randomized. helpful when unison is on
- Relative Modev10Enveloperange: off / ondefault: off
when enabled, sliders add/subtract from the existing shape, allowing for more unique shapes
- Release Affectsv8Envelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Release Amountv1Enveloperange: 0ms to 40.00sdefault: 500ms
amount of time it takes harmonics to fade out after you release a note
- Release Curvev7Enveloperange: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Release Shapev8Envelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Retrigger Pitch LFOsv13Pitchrange: off / ondefault: on
when ON, pitches reset every note; when OFF, pitches remembered for same voice
- Reverb Affectsv24Voiceschoices:AllOddEvenOctave
which harmonics feed into the reverb?
- Reverb Mixv23Voicesrange: OFF to 100.0%default: OFF
adds a reverb-like effect, with sine waves instead of reflections
- Reverb Timev23Voicesrange: 100ms to 15.00sdefault: 0.50s
how long the reverb effect lasts (in seconds)
- Reverb X (Distribution)v24Voicesrange: 0.00 to 1.00default: 0.50
control which harmonics across the spectrum feed into the reverb
- Reverb Y (Curve)v24Voicesrange: 0.00 to 1.00default: 0.50
control which harmonics across the spectrum feed into the reverb
- Slopv24Voicesrange: OFF to 100.0%default: OFF
random per-voice variation in envelope timing.
- Sustain Affectsv8Envelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Sustain Amountv1Enveloperange: OFF to 0.0dBdefault: 0.0dB
volume level that harmonics play at when you hold a note
- Sustain Curvev7Enveloperange: -8.00 to 8.00default: -0.00
what curve applies to the harmonics
- Sustain Shapev8Envelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Transposev23Settingsrange: -24 semi to 12 semidefault: 0 semi
transposes the synth up or down by a number of semitones
- Trem Amountv13Tremrange: 0% to 100%default: 100%
how deep the volume lfos on the harmonics go
- Trem Amount Affectsv23Tremchoices:AllOddEvenOctave
which harmonics does the trem depth apply to?
- Trem Amount X (Distribution)v13Tremrange: 0.00 to 1.00default: 0.50
how the trem depth amount should apply across the harmonics
- Trem Amount Y (Curve)v13Tremrange: 0.00 to 1.00default: 0.50
how the trem depth amount should apply across the harmonics
- Trem Enablev13Tremrange: off / ondefault: off
bypass the whole Trem section
- Trem Pattern Amountv27Tremrange: 0% to 100%default: 0%
the max pattern amount harmonics can have
- Trem Pattern Invertv27Tremrange: off / ondefault: off
invert the pattern shape direction (for Ramp, Sine, Triangle), or regenerate (for Random)
- Trem Pattern Num Harmonicsv27Tremrange: 2 to 512default: 8
how many harmonics the pattern applies to (use low numbers for rhythmic patterns)
- Trem Pattern Shapev27Tremchoices:AllRampTriangleSineRandom
the shape the pattern makes across the harmonics in time
- Trem Rate Hzv13Tremrange: 0.10 Hz to 200 Hzdefault: 2.00 Hz
free running volume modulation specified in Hz
- Trem Rate Notev11Tremchoices:4/13/12/11/11/2 D1 T1/21/4 D1/2 T1/41/8 D1/4 T1/81/16 D1/8 T1/161/32 D1/16 T1/321/64
follows your DAW’s BPM and lets you specify note values (120bpm default)
- Trem Rate X (Distribution)v13Tremrange: 0.00 to 1.00default: 0.50
how the trem rate applies across the harmonics
- Trem Rate Y (Curve)v13Tremrange: 0.00 to 1.00default: 0.50
how the trem rate applies across the harmonics
- Trem Sharpnessv11Tremrange: 0% to 100%default: 50%
higher value has sharper more sparse sound, less time “on”
- Trem Sync Typev11Tremchoices:FreeBPMBPM Abs
choose what the volume modulation is synced to
- Trem Typev11Tremchoices:TriangleRampSquare
how the harmonic volumes behave over time (aka LFO shape)
- Trem Type Invertv16Tremrange: off / ondefault: off
Flip the shape (ramp up becomes ramp down, etc)
- Unison Spreadv19Voicesrange: OFF to 100.0%default: 30.0%
how much the unison voices differ in pitch
- Unison Stereov20Voicesrange: OFF to 100.0%default: 30.0%
how much the unison voices spread across the stereo field
- Unison Voicesv19Voicesrange: 1 to 5default: 1
how many voices play with every note-on
- Velocity Sensitivityv21Voicesrange: OFF to 100.0%default: OFF
how much velocity will affect volume of the patch
- Voice Modev28Voiceschoices:PolyMonoLegato
how notes play: chords (poly), one at a time (mono), or gliding (legato)
- Volumev17Volumesrange: -64.0dB to 20.0dBdefault: 0.0dB
the overall volume (saves with the preset)
v28
- Voice ModeVoiceschoices:PolyMonoLegato
how notes play: chords (poly), one at a time (mono), or gliding (legato)
v27
- Harmonic Slew MsVoicesrange: AUTO to 50.0msdefault: AUTO
smooth fast harmonic changes to reduce clicks. AUTO is a tuned default
- Max HarmonicsVoicesrange: 1 to 511default: 511
the max number of harmonics used per voice
- Trem Pattern AmountTremrange: 0% to 100%default: 0%
the max pattern amount harmonics can have
- Trem Pattern InvertTremrange: off / ondefault: off
invert the pattern shape direction (for Ramp, Sine, Triangle), or regenerate (for Random)
- Trem Pattern Num HarmonicsTremrange: 2 to 512default: 8
how many harmonics the pattern applies to (use low numbers for rhythmic patterns)
- Trem Pattern ShapeTremchoices:AllRampTriangleSineRandom
the shape the pattern makes across the harmonics in time
v25
- Filter TypeVolumeschoices:LowpassBandpass
- Glide FrequencyVoicesrange: 40 Hz to 20.0 kHzdefault: 2.0 kHz
in ABSOLUTE glide mode, the fixed frequency notes glide from
- Glide ModeVoiceschoices:Last NoteRelativeAbsolute
where notes glide from. in LEGATO, only shapes the first note
- Glide SemitonesVoicesrange: -24 semi to 24 semidefault: 1 semi
in RELATIVE glide mode, how many semitones notes glide from
v24
- Env->PitchPitchrange: -100% to 100%default: 0%
positive: more pitch amount when harmonics are loud. negative: less pitch amount when loud.
- Env->TremTremrange: -100% to 100%default: 0%
positive: more trem when harmonic is loud. negative: no trem when harmonic is loud.
- Keyboard->ENVVoicesrange: -100.0% to 100.0%default: OFF
positive: higher notes have longer envelopes. negative: higher notes have shorter envelopes
- Reverb AffectsVoiceschoices:AllOddEvenOctave
which harmonics feed into the reverb?
- Reverb X (Distribution)Voicesrange: 0.00 to 1.00default: 0.50
control which harmonics across the spectrum feed into the reverb
- Reverb Y (Curve)Voicesrange: 0.00 to 1.00default: 0.50
control which harmonics across the spectrum feed into the reverb
- SlopVoicesrange: OFF to 100.0%default: OFF
random per-voice variation in envelope timing.
v23
- Fine TuningSettingsrange: 415 Hz to 466 Hzdefault: 440 Hz
adjust the tuning of the synth, default is 440Hz (A4)
- Glide Time AffectsVoiceschoices:AllOddEvenOctave
which harmonics does the glide time apply to?
- Pitch Noise AffectsPitchchoices:AllOddEvenOctave
which harmonics does the pitch noise apply to?
- Reverb MixVoicesrange: OFF to 100.0%default: OFF
adds a reverb-like effect, with sine waves instead of reflections
- Reverb TimeVoicesrange: 100ms to 15.00sdefault: 0.50s
how long the reverb effect lasts (in seconds)
- TransposeSettingsrange: -24 semi to 12 semidefault: 0 semi
transposes the synth up or down by a number of semitones
- Trem Amount AffectsTremchoices:AllOddEvenOctave
which harmonics does the trem depth apply to?
v21
- Velocity SensitivityVoicesrange: OFF to 100.0%default: OFF
how much velocity will affect volume of the patch
v20
- Glide TimeVoicesrange: 0ms to 5.00sdefault: 0ms
how long it takes to glide between notes
- Glide Time X (Distribution)Voicesrange: 0.00 to 1.00default: 0.50
how the glide time applies across the harmonics
- Glide Time Y (Curve)Voicesrange: 0.00 to 1.00default: 0.50
how the glide time applies across the harmonics
- One ShotEnveloperange: off / ondefault: off
when enabled, notes always play through the full envelope
- Pitch Bend RangeVoicesrange: 1 to 24default: 2
how many semitones a controller’s pitch bend wheel will bend the pitch (in each direction)
- Pitch Noise AmountPitchrange: OFF to 100.0%default: 1.0%
adds gaussian noise to the pitch
- Pitch Noise ModePitchchoices:FuzzSwarm
the character of the pitch noise (fuzz or swarm)
- Pitch Noise X (Distribution)Pitchrange: 0.00 to 1.00default: 0.00
how the noise amount applies across the harmonics
- Pitch Noise Y (Curve)Pitchrange: 0.00 to 1.00default: 0.50
how the noise amount applies across the harmonics
- Randomize PhaseVoicesrange: off / ondefault: off
each time you play a note, phase is randomized. helpful when unison is on
- Unison StereoVoicesrange: OFF to 100.0%default: 30.0%
how much the unison voices spread across the stereo field
v19
- Envelope SplitVoicesrange: 1 to 128default: 10
- Envelope TimingVoicesrange: 1 to 511default: 128
- Filter SlopeVolumesrange: 0 to 64default: 3
- Max VoicesVoicesrange: 1 to 20default: 20
- Unison SpreadVoicesrange: OFF to 100.0%default: 30.0%
how much the unison voices differ in pitch
- Unison VoicesVoicesrange: 1 to 5default: 1
how many voices play with every note-on
v18
- Filter CutoffVolumesrange: 20 Hz to 20.0 kHzdefault: 5.0 kHz
v17
- Pitch EnablePitchrange: off / ondefault: off
bypass the whole pitch section
- Pitch InvertPitchrange: off / ondefault: off
Flip the shapes (ramp up becomes ramp down, etc)
- Pitch RangePitchrange: 1 to 24default: 1
the range (in semitones) that PITCH AMOUNT applies to
- VolumeVolumesrange: -64.0dB to 20.0dBdefault: 0.0dB
the overall volume (saves with the preset)
v16
- Attack OvershootEnveloperange: 0.00 to 0.50default: 0.30
- Decay and Release UndershootEnveloperange: 0.0000100 to 0.1000000default: 0.0001000
- Trem Type InvertTremrange: off / ondefault: off
Flip the shape (ramp up becomes ramp down, etc)
v14
- Pitch AmountPitchrange: OFF to 100.0%default: 15.0%
the maximum amount the pitch will change
- Pitch Amount AffectsPitchchoices:AllOddEvenOctave
which harmonics does the pitch amount apply to?
- Pitch Amount X (Distribution)Pitchrange: 0.00 to 1.00default: 0.00
how the pitch amount applies across the harmonics
- Pitch Amount Y (Curve)Pitchrange: 0.00 to 1.00default: 0.50
how the pitch amount applies across the harmonics
v13
- Pitch LFO ShapePitchchoices:SineTriangleRampSquare
the waveform that the pitches of harmonics follow (pitch LFO shape)
- Pitch Rate HzPitchrange: 0.05 Hz to 500 Hzdefault: 5.0 Hz
how many times a second the pitch modulates
- Pitch Rate NotePitchchoices:4/13/12/11/11/2 D1 T1/21/4 D1/2 T1/41/8 D1/4 T1/81/16 D1/8 T1/161/32 D1/16 T1/321/64
how many times a second the pitch modulates
- Pitch Rate X (Distribution)Pitchrange: 0.00 to 1.00default: 0.00
how the pitch rate applies across the harmonics
- Pitch Rate Y (Curve)Pitchrange: 0.00 to 1.00default: 0.50
how the pitch rate applies across the harmonics
- Pitch StiffnessPitchrange: OFF to 1.0000default: OFF
each successive harmonic gets a bit sharper (like a stringed instrument on steroids)
- Pitch Sync TypePitchchoices:FreeBPMTrem
how would you like your pitch synced?
- Retrigger Pitch LFOsPitchrange: off / ondefault: on
when ON, pitches reset every note; when OFF, pitches remembered for same voice
- Trem AmountTremrange: 0% to 100%default: 100%
how deep the volume lfos on the harmonics go
- Trem Amount X (Distribution)Tremrange: 0.00 to 1.00default: 0.50
how the trem depth amount should apply across the harmonics
- Trem Amount Y (Curve)Tremrange: 0.00 to 1.00default: 0.50
how the trem depth amount should apply across the harmonics
- Trem EnableTremrange: off / ondefault: off
bypass the whole Trem section
- Trem Rate HzTremrange: 0.10 Hz to 200 Hzdefault: 2.00 Hz
free running volume modulation specified in Hz
- Trem Rate X (Distribution)Tremrange: 0.00 to 1.00default: 0.50
how the trem rate applies across the harmonics
- Trem Rate Y (Curve)Tremrange: 0.00 to 1.00default: 0.50
how the trem rate applies across the harmonics
v11
- Trem Rate NoteTremchoices:4/13/12/11/11/2 D1 T1/21/4 D1/2 T1/41/8 D1/4 T1/81/16 D1/8 T1/161/32 D1/16 T1/321/64
follows your DAW’s BPM and lets you specify note values (120bpm default)
- Trem SharpnessTremrange: 0% to 100%default: 50%
higher value has sharper more sparse sound, less time “on”
- Trem Sync TypeTremchoices:FreeBPMBPM Abs
choose what the volume modulation is synced to
- Trem TypeTremchoices:TriangleRampSquare
how the harmonic volumes behave over time (aka LFO shape)
v10
- Relative ModeEnveloperange: off / ondefault: off
when enabled, sliders add/subtract from the existing shape, allowing for more unique shapes
v8
- Attack AffectsEnvelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Attack ShapeEnvelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Decay AffectsEnvelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Decay ShapeEnvelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Hold AffectsEnvelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Hold ShapeEnvelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Offset AffectsEnvelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Offset ShapeEnvelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Release AffectsEnvelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Release ShapeEnvelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
- Sustain AffectsEnvelopechoices:AllOddEvenOctave
what harmonics should these settings apply to?
- Sustain ShapeEnvelopechoices:AllLow to HighHigh to LowInside OutOutside In
how you like the slider value to apply to the harmonics
v7
- Attack CurveEnveloperange: -8.00 to 8.00default: -4.00
what curve applies to the harmonics
- Decay CurveEnveloperange: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Hold CurveEnveloperange: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Offset CurveEnveloperange: -8.00 to 8.00default: -0.00
what curve applies to the harmonics
- Release CurveEnveloperange: -8.00 to 8.00default: 4.00
what curve applies to the harmonics
- Sustain CurveEnveloperange: -8.00 to 8.00default: -0.00
what curve applies to the harmonics
v1 the originals
- Attack AmountEnveloperange: 0ms to 30.00sdefault: 0ms
amount of time harmonics take to reach their full volume
- Decay AmountEnveloperange: 0ms to 30.00sdefault: 0ms
after reaching full volume, the amount of time harmonics take to fall to the sustain level
- Harmonic Volumes×36 (gain01–gain36)Volumesrange: per-harmonic dB (varies)default: 1 / harmonic number
volumes of the first 36 harmonics. All at full makes a sawtooth.
- Hold AmountEnveloperange: 0ms to 30.00sdefault: 0ms
amount of time harmonics will hold the sustain volume after you release a note
- Offset AmountEnveloperange: 0ms to 30.00sdefault: 0ms
amount of time before harmonics turn on
- Release AmountEnveloperange: 0ms to 40.00sdefault: 500ms
amount of time it takes harmonics to fade out after you release a note
- Sustain AmountEnveloperange: OFF to 0.0dBdefault: 0.0dB
volume level that harmonics play at when you hold a note
Leave a Reply